lewdslewrate
2011-05-27 19:40:27 UTC
hi....studied the manuals but well and truly stuck. Installed digital
cards into Focusrite ISA828 pre-amp & Yamaha AW2400 multi-track
recorder. ADAT optical link 24 bit/44.1. ISA nor AW recognise word
clock data from each other. I expected data to go from ISA as master
to AW as slave via any pair of tracks from the ISA (as per manual) but
relevant buttons for tracks on the Aw are greyed out....not
recognising any data. THe Aw recognises the ADAT card and acknowledges
the sample rate.
I guess this is one for someone who has knowledge of both bits of
kit? worth a try here though...naturally i have sent a query to
Yamaha etc.
On Yamaha i can get audio as ouput and on it's input meters after
connecting one mic to the ISA and only having the optical cable
connected. The gain control on ISA is fully functional as monitored
etc.
any thoughts welcomed
cheers
cards into Focusrite ISA828 pre-amp & Yamaha AW2400 multi-track
recorder. ADAT optical link 24 bit/44.1. ISA nor AW recognise word
clock data from each other. I expected data to go from ISA as master
to AW as slave via any pair of tracks from the ISA (as per manual) but
relevant buttons for tracks on the Aw are greyed out....not
recognising any data. THe Aw recognises the ADAT card and acknowledges
the sample rate.
I guess this is one for someone who has knowledge of both bits of
kit? worth a try here though...naturally i have sent a query to
Yamaha etc.
On Yamaha i can get audio as ouput and on it's input meters after
connecting one mic to the ISA and only having the optical cable
connected. The gain control on ISA is fully functional as monitored
etc.
any thoughts welcomed
cheers